COMMIS (STEAK) Job Hiring in Saudi Arabia for Sisban Trofi Food Company

Jobs Abroad

Job Opportunity in Saudi Arabia!

Employer/Company: Sisban Trofi Food Company
DMW Registration / Accreditation No. 10495601
Job Location: Saudi Arabia

Sisban Trofi Food Company is seeking an experienced Commis – Steak to assist in the preparation and cooking of steak and grilled meat dishes. The successful candidate should have at least two years of local experience in the same field and be able to support the steak section in maintaining consistent food quality, proper preparation, and kitchen hygiene.

COMMIS (STEAK)

Qualifications:

  • Minimum 2 years of relevant work experience.
  • At least 2 years of local experience in the same field.
  • Previous experience in steak, grill, meat preparation, or a similar professional kitchen is preferred.
  • Must be a graduate of a four-year undergraduate course.
  • Basic knowledge of steak preparation and cooking techniques.
  • Familiarity with different meat cuts and levels of doneness.
  • Ability to safely operate commercial grills, ovens, and other kitchen equipment.
  • Knowledge of food safety, HACCP, hygiene, and sanitation practices.
  • Strong attention to food quality, cleanliness, and presentation.
  • Good teamwork and communication skills.
  • Ability to work efficiently under pressure in a busy kitchen.
  • Physically fit and able to stand for extended periods.
  • Willing to be assigned in Riyadh, Saudi Arabia.
  • Male applicants are preferred for this position.

Responsibilities:

  • Assist the Chef de Partie and senior chefs in preparing steak and grilled meat dishes.
  • Prepare beef and other meat products by trimming, cutting, portioning, seasoning, and marinating.
  • Prepare ingredients, sauces, marinades, garnishes, and side dishes for steak orders.
  • Assist with grilling, broiling, pan-searing, and other steak cooking methods.
  • Operate grills, broilers, ovens, pans, and other kitchen equipment safely.
  • Monitor cooking temperatures and ensure steaks are prepared according to required levels of doneness.
  • Follow recipes, portion specifications, and food presentation standards.
  • Check the freshness and quality of meat and other ingredients before preparation.
  • Properly store, label, and rotate meat and food products.
  • Assist with preparation and organization of the steak station before and during service.
  • Maintain cleanliness and sanitation of the assigned workstation, equipment, utensils, and kitchen areas.
  • Follow food safety, HACCP, hygiene, and sanitation procedures.
  • Assist in controlling food portions and minimizing food waste.
  • Support senior chefs during busy service periods to ensure orders are completed on time.
  • Clean and organize the workstation after service.
  • Report ingredient shortages, equipment problems, or food quality concerns to the supervisor.
  • Perform other kitchen duties as assigned.

Requirements:

  • Updated Resume
  • Certificate of Employment
  • Valid Passport

Walk-in applicants can visit us at:
Asmacs Recruitment Services, Inc.
#2nd Floor, 426 Bulalakaw St., Plainview Subdivision, Mandaluyong City

Employer Overview:

Sisban Trofi refers to the food and beverage (F&B) partnership and culinary platform associated with SISBAN, a major investment holding company, and TROFI, a restaurant development platform co-founded by Tariq Al Tuwaijri. Together, they build, acquire, and scale dining brands across global food hubs like Riyadh, London, and New York


FOR MANPOWER POOLING ONLY.
NO FEES in any form and/or purpose will be collected from the applicants.
Beware of illegal recruiters and human traffickers.

Only candidates can apply for this job.

Leave your thoughts

Search Jobs

Architect / 3D Visualizer Job Hiring in Saudi Arabia for IMPRESSIV

Career Opportunities in Saudi Arabia! Job Vacancy: Architect / 3D Visualizer Employer/Company: Al Enjaz Al Maabar Company Limited (IMPRESSIV) DMW Accreditation No.: 202506120 Job Location: Saudi Arabia Architect / 3D Visualizer Qualifications: Bachelor’s degree in Architecture, Multimedia, Advertising, or a related design discipline. Candidates must be a Bachelor’s / College Degree holder in Advertising / Media; Architecture / Urban Studies;

Instrumentation and Control Design Engineer Job Hiring in Saudi Arabia for SRACO International Contracting

Career Opportunity in Saudi Arabia! Job Vacancy: Instrumentation and Control Design Engineer Employer/Company: SRACO International Contracting DMW Registration / Accreditation No.: 2023105283 Jobsite / Projection Location: Kingdom of Saudi Arabia Instrumentation and Control Design Engineer Qualifications: Bachelor’s Degree in Electronics and Communication Engineering, Electrical Engineering, or an equivalent qualification acceptable to the User Organization. Must have passed the National Licensure

HEAVY EQUIPMENT MECHANIC Job Hiring in New Zealand for Working International Resourcing Limited

Job Opportunity in New Zealand! Job Vacancy: HEAVY EQUIPMENT MECHANIC (Specialized in Cranes) Principal/Company: Working International Resourcing Limited Job Location: New Zealand Working International Resourcing Limited is seeking qualified and experienced Heavy Equipment Mechanics specializing in cranes to work in New Zealand. The successful candidates will be responsible for inspecting, maintaining, troubleshooting, repairing, and servicing cranes, hoists, and electromechanical lifting

TRUCK DRIVER Job Hiring in New Zealand for Working International Resourcing Limited

Job Opportunity in New Zealand! Job Vacancy: TRUCK DRIVER Principal/Company: Working International Resourcing Limited Job Location: New Zealand TRUCK DRIVER Qualifications: At least 2 years of relevant experience in construction works. Proven experience operating trucks in construction, civil works, or related environments. Experience transporting materials, plant, equipment, spoil, aggregate, and other construction items. At least High School Graduate. Must have

EXCAVATOR OPERATOR Job Hiring in New Zealand for Working International Resourcing Limited

Job Opportunity in New Zealand! Job Vacancy: EXCAVATOR OPERATOR Principal/Company: Working International Resourcing Limited Job Location: New Zealand EXCAVATOR OPERATOR Qualifications: At least 3 years of verifiable work experience in civil drainage or underground services. Proven experience operating an excavator in civil construction or related projects. Ability to safely operate heavy plant and machinery in different construction site conditions. At

PLUMBER Job Hiring in New Zealand for Working International Resourcing Limited

Job Opportunity in New Zealand! Job Vacancy: LICENSED ELECTRICIAN Principal/Company: Working International Resourcing Limited Job Location: New Zealand Working International Resourcing Limited is seeking qualified and experienced Plumbers to work in New Zealand. The successful candidates will perform civil drainage and underground services work, including the installation, connection, maintenance, and repair of manholes, sewage systems, stormwater networks, and wastewater pipes.

Fine Dining Host/Hostess Job Hiring in Saudi Arabia for Al Ahlia Human Resources

Job  Opportunities in Saudi Arabia! Job Vacancy: Fine Dining Host/Hostess Employer/Company: Al Ahlia Human Resources Job Location: Saudi Arabia Al Ahlia Human Resources is seeking qualified and presentable Fine Dining Hosts/Hostesses to join a professional hospitality team in Saudi Arabia. The successful candidates will be responsible for welcoming guests, managing seating arrangements, providing professional customer service, and helping create an

OVERHEAD CRANE OPERATOR Job Hiring in Czech Republic for Grapecare Limited

Career Opportunity in Czech Republic! Job Vacancy: OVERHEAD CRANE OPERATOR Employer/Company: Grapecare Limited DMW Accreditation No.: 10384073 Job Location: Czech Republic Grapecare Limited is seeking qualified and experienced Overhead Crane Operators to work in the Czech Republic. The successful candidates will safely operate overhead cranes to lift, move, position, and load heavy steel and metal materials in a warehouse or

Senior Civil Design Engineer Job Hiring in Saudi Arabia for SRACO International Contracting

Career Opportunity in Saudi Arabia! Job Vacancy: Senior Civil Design Engineer Employer/Company: SRACO International Contracting DMW Registration / Accreditation No.: 2023105283 Jobsite / Projection Location: Kingdom of Saudi Arabia Senior Civil Design Engineer Qualifications: Bachelor of Science Degree in Civil or equivalent acceptable by User Organization. Must have pass National Licensure or equivalent and possess a cure license as Registered

TRAILER ASSEMBLY TECHNICIAN Job Hiring in Czech Republic for Grapecare Limited

Career Opportunity in Czech Republic! Job Vacancy: TRAILER ASSEMBLY TECHNICIAN Employer/Company: Grapecare Limited DMW Accreditation No.: 10384073 Job Location: Czech Republic Grapecare Limited is seeking qualified and experienced Trailer Assembly Technicians to work in the Czech Republic. The successful candidates will be responsible for assembling trailer chassis, hydraulic and pneumatic systems, braking systems, electrical components, and vehicle body parts according

MAG WELDER / PLASMA CUTTER Job Hiring in Czech Republic for Grapecare Limited

Career Opportunity in Czech Republic! Job Vacancy: MAG WELDER / PLASMA CUTTER Employer/Company: Grapecare Limited DMW Accreditation No.: 10384073 Job Location: Czech Republic Grapecare Limited is seeking qualified and experienced MAG Welders / Plasma Cutters to work in the Czech Republic. The successful candidates will perform MAG welding and plasma cutting operations for steel structures and fabricated components, including trailer,

ROBOTIC WELDING OPERATOR / PROGRAMMER Job Hiring in Czech Republic for Grapecare Limited

Career Opportunity in Czech Republic! Job Vacancy: ROBOTIC WELDING OPERATOR / PROGRAMMER Employer/Company: Grapecare Limited DMW Accreditation No.: 10384073 Job Location: Czech Republic Grapecare Limited is seeking qualified and experienced Robotic Welding Operators / Programmers to work in the Czech Republic. The successful candidates will operate, program, monitor, and optimize robotic welding systems to produce accurate and high-quality welded components.

CNC PRESS BRAKE OPERATOR Job Hiring in Czech Republic for Grapecare Limited

Career Opportunity in Czech Republic! Job Vacancy: CNC PRESS BRAKE OPERATOR Employer/Company: Grapecare Limited DMW Accreditation No.: 10384073 Job Location: Czech Republic Grapecare Limited is seeking qualified and experienced CNC Press Brake Operators to work in the Czech Republic. The successful candidates will operate CNC press brake and bending machines, prepare and position materials, interpret technical drawings and blueprints, create

Project/Site Engineer Mechanical Job Hiring in Saudi Arabia for SRACO International Contracting

Career Opportunity in Saudi Arabia! Job Vacancy: Project/Site Engineer Mechanical Employer/Company: SRACO International Contracting / Saudi Aramco EMS DMW Registration / Accreditation No.: 2023105283 Jobsite Location: Kingdom of Saudi Arabia Project/Site Engineer Mechanical Qualifications: Bachelor of Science Degree in Mechanical Engineering or a similar degree approved by the User Representative. Minimum of 5 years of post-qualification experience in building construction

CNC LASER CUTTING / PLASMA CUTTING OPERATOR Job Hiring in Czech Republic for Grapecare Limited

Career Opportunity in Czech Republic! Job Vacancy: CNC LASER CUTTING / PLASMA CUTTING OPERATOR Employer/Company: Grapecare Limited DMW Accreditation No.: 10384073 Job Location: Czech Republic Grapecare Limited is seeking qualified and experienced CNC Laser Cutting / Plasma Cutting Operators to work in the Czech Republic. The successful candidates will operate CNC laser and plasma cutting machines, prepare materials, interpret technical

 WELDER Job Hiring in Canada for New Life Opportunities Placement Agency

Career Opportunity in Canada! Job Vacancy: WELDER Job Location: Canada A Canadian employer is seeking skilled and experienced Welders to join its workforce in Canada. The successful candidates will be responsible for performing high-quality welding and fabrication work using GMAW, SMAW, FCAW, and GTAW processes. Applicants should have substantial hands-on welding experience, the ability to follow technical specifications, and a

 FEED MILL MANAGER Job Hiring in Canada for New Life Opportunities Placement Agency

Career Opportunity in Canada! Job Vacancy: FEED MILL MANAGER Job Location: Canada A leading agricultural and livestock feed operation in Canada is seeking an experienced and highly organized Feed Mill Manager to oversee the safe, efficient, and reliable operation of a feed mill facility. The successful candidate will manage daily mill operations, supervise staff, coordinate production and ingredient supply, maintain

Senior Detailer Job Hiring in Greece for Easy Work Staffing Solutions

Job Opportunity in Greece! Job Vacancy: Senior Detailer Employer/Company: Easy Work Staffing Solutions Job Location: Greece Easy Work Staffing Solutions is seeking an experienced and detail-oriented Senior Detailer to join a professional technical and fabrication team in Greece. The successful candidate will be responsible for preparing and reviewing detailed technical drawings, interpreting design specifications, coordinating with production teams, and ensuring

Hand Lay-up Boat Building Technician Job Hiring in Greece for Easy Work Staffing Solutions

Job Opportunity in Greece! Job Vacancy: Hand Lay-up Boat Building Technician (Junior and Senior Positions) Employer/Company: Easy Work Staffing Solutions Job Location: Greece Easy Work Staffing Solutions is seeking qualified and experienced Hand Lay-up Boat Building Technicians for junior and senior positions in Greece. The successful candidates will be responsible for performing hand lay-up and fiberglass boat-building work, including preparing

MAINTENANCE PLANNER Job Hiring in Saudi Arabia for SRACO International Contracting

Career Opportunity in Saudi Arabia! Job Vacancy: MAINTENANCE PLANNER Employer/Company: SRACO International Contracting DMW Registration / Accreditation No.: 2023105283 Job Location: Kingdom of Saudi Arabia MAINTENANCE PLANNER Qualifications: A minimum of 8 years of working experience is required. Must have 8 years of experience from the date of qualification, with at least 3 years of experience in program and planning
error: Content is protected !!