ROOF PLUMBER Job Hiring in Australia for Peloton Workready

Jobs Abroad

Career Opportunity in Australia!

Job Vacancy: ROOF PLUMBER
Employer/Company: Peloton Workready
DMW Accreditation No: 10494259
Job Location: Australia

ROOF PLUMBER

Qualifications:

  • Minimum 3 years of working experience as a Roof Plumber or in a related roofing, roof plumbing, or drainage position.
  • Vocational Diploma / Short Course Certificate holder in a relevant or similar field.
  • Must have a valid passport.
  • Must have relevant work experience in the same field.
  • Practical experience installing and maintaining gutters, downpipes, roof drainage systems, and rainwater collection systems.
  • Experience installing and repairing roof flashings around vents, skylights, chimneys, joints, valleys, and other roof penetrations.
  • Knowledge of installing metal roof sheeting, wall cladding, and composite roofing systems.
  • Skilled in measuring, cutting, fitting, securing, and sealing roofing and cladding materials.
  • Knowledge of waterproofing membranes, sealants, coatings, and other weatherproofing materials.
  • Ability to read and interpret technical drawings, roof plans, building specifications, and installation instructions.
  • Ability to diagnose and repair roof leaks, blocked drainage systems, damaged gutters, and defective flashings.
  • Familiarity with proper roof drainage, water-flow, sealing, and waterproofing practices.
  • Ability to safely use hand tools, power tools, ladders, and other roofing and plumbing equipment.
  • Good understanding of workplace health and safety procedures, including working at heights and fall protection.
  • Strong attention to detail and commitment to quality workmanship.
  • Physically fit and capable of climbing, bending, kneeling, lifting, and performing manual work at heights.
  • Good practical problem-solving and troubleshooting skills.
  • Ability to work independently and as part of a team.
  • Reliable, hardworking, disciplined, and safety-conscious.

Responsibilities:

  • Read and interpret technical drawings, roof plans, building specifications, and work instructions to determine required materials, measurements, layouts, and installation methods.
  • Inspect roofs, gutters, drainage systems, flashings, and other components to identify leaks, damage, blockages, and areas requiring repair or replacement.
  • Measure and mark roof surfaces and drainage layouts accurately before installation.
  • Install gutters, downpipes, rainwater outlets, and other roof drainage systems to safely direct rainwater away from buildings.
  • Install and connect rainwater tanks and associated drainage components according to project requirements.
  • Ensure gutters and downpipes are correctly positioned, aligned, securely fastened, and properly graded for effective water flow.
  • Install, repair, and replace roof flashings around joints, roof penetrations, vents, skylights, chimneys, valleys, and other vulnerable areas.
  • Apply appropriate sealants, waterproofing compounds, membranes, and protective coatings to prevent water penetration and roof leaks.
  • Install metallic roof sheeting, metal roof cladding, wall cladding, and composite roof systems according to drawings and manufacturer specifications.
  • Measure, cut, shape, and fit roofing sheets and cladding materials accurately around edges, corners, penetrations, and roof structures.
  • Secure roof sheeting, cladding, flashings, and related components using appropriate fasteners, fixings, and installation methods.
  • Ensure overlaps, joints, seams, and penetrations are properly sealed to provide effective weatherproofing.
  • Clear blocked gutters, downpipes, roof drains, and other drainage components to restore proper water flow.
  • Repair damaged or leaking gutters, downpipes, flashings, roof sheets, and waterproofing systems.
  • Remove and replace deteriorated or damaged roofing and drainage components when required.
  • Conduct water-flow and leak checks to verify that completed drainage and waterproofing work is effective.
  • Inspect finished work for proper alignment, secure fastening, effective drainage, weatherproofing, and overall workmanship.
  • Identify defects or installation issues and carry out necessary adjustments, repairs, or corrective work.
  • Safely use hand tools, power tools, cutting equipment, measuring instruments, ladders, scaffolding, and other roofing equipment.
  • Maintain tools, equipment, materials, and work areas in clean and serviceable condition.
  • Handle and store roofing materials, sealants, membranes, coatings, and other supplies safely.
  • Coordinate with roofers, builders, plumbers, carpenters, electricians, supervisors, and other trades to ensure smooth project execution.
  • Follow project schedules and complete assigned roof plumbing and cladding work within required timeframes.
  • Follow applicable Australian building requirements, plumbing standards, site procedures, and workplace safety regulations.
  • Follow proper working-at-heights procedures and use required fall-protection equipment and personal protective equipment (PPE).
  • Maintain a clean and safe work area and promptly report hazards, structural concerns, leaks, or damaged equipment to the supervisor.
  • Perform other roof plumbing, drainage, cladding, waterproofing, maintenance, and repair duties assigned by management.

Requirements:

  • Updated RESUME
  • Valid passport
  • Employment CERTIFICATES
  • Other CERTIFICATES related to job preferences.
  • PEOS
  • E-reg

Walk-in applicants can visit us at:
Fil-Gulf Manpower & General Services, Inc.
📍Unit 1203, Manila Luxury Condominium, Pearl Drive, Pasig City


FOR MANPOWER POOLING ONLY.
NO FEES in any form and/or purpose will be collected from the applicants.
Beware of illegal recruiters and human traffickers.

Only candidates can apply for this job.

Leave your thoughts

Search Jobs

Furniture Carpenter Job Hiring in Saudi Arabia for United Printing Company For Trading Services

Career Opportunity in Saudi Arabia! Job Vacancy: Furniture Carpenter Employer/Company: United Printing Company For Trading Services DMW Registration / Accreditation No. 10495944 Job Location: Saudi Arabia Furniture Carpenter Qualifications: Minimum 1 year of working experience as a Furniture Carpenter or in a related carpentry/furniture manufacturing position. No minimum educational attainment is required for this position. Male applicants are preferred for

Furniture Painter Job Hiring in Saudi Arabia for United Printing Company For Trading Services

Career Opportunity in Saudi Arabia! Job Vacancy: Furniture Painter Employer/Company: United Printing Company For Trading Services DMW Registration / Accreditation No. 10495944 Job Location: Saudi Arabia Furniture Painter Qualifications: Minimum 1 year of working experience as a Furniture Painter or in a related painting and finishing position. No minimum educational attainment is required for this position. Male applicants are preferred

SMALL ENGINE MECHANIC Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: SMALL ENGINE MECHANIC Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia Peloton Workready is seeking an experienced and skilled Small Engine Mechanic for an overseas work opportunity in Australia. The successful candidate will be responsible for diagnosing, maintaining, repairing, and servicing small engines and related equipment, including inspecting mechanical components, replacing worn

BRICKLAYER Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: BRICKLAYER Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia Peloton Workready is seeking an experienced and skilled Bricklayer for an overseas work opportunity in Australia. The successful candidate will be responsible for laying and building brick, stone, and concrete block structures, interpreting construction plans, preparing mortar, setting accurate guidelines, cutting and shaping

WALL & FLOOR TILER Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: WALL & FLOOR TILER Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia Peloton Workready is seeking an experienced and skilled Wall & Floor Tiler for an overseas work opportunity in Australia. The successful candidate will be responsible for preparing wall and floor surfaces, measuring and planning tile layouts, cutting and shaping tiles,

CARPENTER Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: CARPENTER Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia Peloton Workready is seeking an experienced and skilled Carpenter for an overseas work opportunity in Australia. The successful candidate will be responsible for interpreting construction plans, measuring and cutting materials, building structural frameworks, installing doors, windows, trim, and cabinetry, and performing carpentry repairs

PLASTERER (WALL AND CEILING) Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: PLASTERER (WALL AND CEILING) Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia Peloton Workready is seeking an experienced and skilled Plasterer (Wall and Ceiling) for an overseas work opportunity in Australia. The successful candidate will be responsible for preparing wall and ceiling surfaces, mixing plastering materials, applying base and finish coats, installing

PAINTER Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: PAINTER Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia Peloton Workready is seeking an experienced and skilled Painter for an overseas work opportunity in Australia. The successful candidate will be responsible for preparing surfaces, protecting surrounding areas, mixing and matching paint colors, applying primers and paint using brushes, rollers, or spray equipment,

RENDERER (SOLID PLASTER) Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: RENDERER (SOLID PLASTER) Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia Peloton Workready is seeking an experienced and skilled Renderer (Solid Plaster) for an overseas work opportunity in Australia. The successful candidate will be responsible for preparing wall and ceiling surfaces, mixing and applying cement render and plaster, leveling and smoothing surfaces,

ROOF PLUMBER Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: ROOF PLUMBER Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia ROOF PLUMBER Qualifications: Minimum 3 years of working experience as a Roof Plumber or in a related roofing, roof plumbing, or drainage position. Vocational Diploma / Short Course Certificate holder in a relevant or similar field. Must have a valid passport. Must

FLOOR FINISHER Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: FLOOR FINISHER Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia FLOOR FINISHER Qualifications: Minimum 3 years of working experience as a Floor Finisher or in a related flooring installation and finishing position. Vocational Diploma / Short Course Certificate holder in a relevant or similar field. Must have a valid passport. Must have

CABINET MAKER Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: CABINET MAKER Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia Peloton Workready is seeking an experienced and skilled Cabinet Maker for an overseas work opportunity in Australia. The successful candidate will be responsible for interpreting technical drawings, measuring and cutting timber and board materials, operating woodworking and CNC machinery, assembling cabinetry, applying

STEEL FRAMER Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: STEEL FRAMER Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia STEEL FRAMER Qualifications: Minimum 3 years of working experience as a Steel Framer or in a related steel framing/construction position. Vocational Diploma / Short Course Certificate holder in a relevant or similar field. Must have a valid passport. Must have relevant work

WOOD MACHINIST Job Hiring in Australia for Peloton Workready

Career Opportunity in Australia! Job Vacancy: WOOD MACHINIST Employer/Company: Peloton Workready DMW Accreditation No: 10494259 Job Location: Australia WOOD MACHINIST Qualifications: Minimum 3 years of working experience as a Wood Machinist or in a related woodworking/machining position. Vocational Diploma / Short Course Certificate holder in a relevant field. Must have a valid passport. Must have relevant experience in the same

Auto Denter Job Hiring in Qatar for Teyseer Group

Career Opportunity in Qatar! Job Vacancy: Auto Denter Employer/Company: Teyseer Group Job Location: Qatar Auto Denter Qualifications: Male applicants are preferred. Minimum 2 years of working experience as an Auto Denter, Auto Body Repair Technician, or in a related position. Vocational Diploma / Short Course Certificate holder in a relevant field. Practical experience in automotive dent repair, body repair, collision

Auto Painter Job Hiring in Qatar for Teyseer Group

Career Opportunity in Qatar! Job Vacancy: Auto Painter Employer/Company: Teyseer Group Job Location: Qatar Auto Painter Qualifications: Male applicants are preferred. Minimum 2 years of working experience as an Auto Painter or in a related automotive painting position. Vocational Diploma / Short Course Certificate holder in a relevant field. Practical experience in automotive surface preparation, painting, refinishing, and finishing. Skilled

BUTCHER Job Hiring in Papua New Guinea for Super Value Store Limited

Job Opportunity in Papua New Guinea! Job Vacancy: BUTCHER Employer/Company: Super Value Store Limited DMW Accreditation No.: 9317 Job Location: Papua New Guinea BUTCHER Qualifications: Minimum 5 years of working experience as a Butcher or in a related meat-processing position. Vocational Diploma / Short Course Certificate in Food and Beverage Preparation/Service Management or a similar field. Experience working in a

HOTEL ATTENDANT Job Hiring in Croatia for Anker Grupa

Job Opportunity in Croatia! Job Vacancy: HOTEL ATTENDANT Employer/Company: Anker Grupa d.o.o. DMW Accreditation No.: 10397680 Job Location: Croatia HOTEL ATTENDANT Qualifications: Minimum 3 years of working experience in a hotel, hospitality, tourism, or related field. Vocational Diploma / Short Course Certificate in Hospitality/Tourism Management or a similar field. Able to communicate in basic English. Previous experience in guest service,

MASSAGE THERAPIST Job Hiring in Saudi Arabia for Establishment Colt Kyar Agriculture

Career Opportunity in Saudi Arabia! Job Vacancy: MASSAGE THERAPIST Employer/Company: Establishment Colt Kyar Agriculture DMW Registration / Accreditation No. 202501160 Job Location: Saudi Arabia MASSAGE THERAPIST Qualifications: Female applicants are preferred. Minimum 1 year of working experience as a Massage Therapist or in a related position. At least High School Graduate. Practical knowledge of professional massage therapy techniques and procedures.

INDUSTRIAL TECHNICIAN Job Hiring in Ivory Coast for EMATYS Côte d’Ivoire

Job Opportunity in Ivory Coast! Job Vacancy: INDUSTRIAL TECHNICIAN Employer/Company: EMATYS Côte d’Ivoire DMW Accreditation No.: 8671 Job Location: Ivory Coast INDUSTRIAL TECHNICIAN Qualifications: Minimum 10 years of working experience in industrial maintenance, machinery, equipment servicing, or a related field. Vocational Diploma / Short Course Certificate holder in a relevant technical field. Male applicants are preferred. Must be ex-abroad, preferably
error: Content is protected !!