Manufacturing Worker Job Hiring in Saudi Arabia for Dar Al Masalla Factory for Marble and Stone

Jobs Abroad

Career Opportunity in Saudi Arabia!

Job Vacancy: Manufacturing Worker
Employer / Company: Dar Al Masalla Factory for Marble and Stone
DMW Accreditation No.: 10489846
Job Location: Saudi Arabia

Manufacturing Worker

Qualifications:

  • Minimum of 4 years of working experience is required.
  • Candidates must be a Vocational Diploma / Short Course Certificate holder in related fields.
  • Male applicants are preferred for this role.
  • Experience in installing marble, granite, ceramic tiles, and natural stone materials.
  • Ability to read layouts, measurements, and installation plans accurately.
  • Skilled in cutting, shaping, polishing, and finishing stone materials.
  • Knowledge of mortar, cement, adhesives, grouting, and sealing techniques.
  • Familiarity with hand tools and power tools used in stone and tile installation.
  • Good understanding of construction site safety procedures and quality standards.
  • Physically fit and capable of handling heavy materials and equipment.

Responsibilities:

  • Install marble, granite, ceramic tiles, and natural stone on floors, walls, ceilings, and other surfaces.
  • Measure and mark surfaces according to approved layouts and designs.
  • Prepare work areas by cleaning, leveling, and removing old materials before installation.
  • Cut and shape stone and tile materials to fit edges, corners, and special design requirements.
  • Mix and apply mortar, cement, grout, and adhesives to secure materials properly.
  • Align and level tiles and stone to maintain proper spacing and pattern consistency.
  • Apply grout, seal joints, and perform finishing work for a polished appearance.
  • Polish marble and stone surfaces to achieve required quality standards.
  • Repair or replace damaged tiles, stone, and related finishes when required.
  • Operate tools and equipment safely while following workplace safety procedures.
  • Maintain cleanliness of the work area and ensure quality workmanship throughout the installation process.

Requirements:

  • Updated Resume with recent clear photo
  • High School Diploma if High School Graduate
  • Diploma and TOR if College Graduate
  • Employment certificates (previous to present)
  • Trainings attended
  • Exit visa and Iqama id (Ex Saudi)
  • Passport copy (1 year valid)

You may visit us and submit your application personally at our office address:
7107 Islands Placement and Promotions Inc.
No. 54 Molave Drive, Woodsrow 3 Townhomes, Manuyo Dos, Las Pinas City

Employer Overview:

PLEDGE Constructions and Trading Agencies is governed under the Chairmanship of Mr. Hassan Ateek Al Ghanem, and Managed by Mr. Mohamed S. Abdelrhman (General Director), with a construction field experience of more than 10 years. It has a proven record for delivering large and challenging projects on time and satisfying the required budget, quality and specifications.

PLEDGE’s history, the company was registered in Qatar as a limited liability company with the name, “Pledge Constructions & Trading Agencies W.L.L” Thus began a history of uninterrupted and accelerated development specializes in designing, turnkey interior fit-out, civil construction, carpentry, joinery & MEP works.

The business of the company is conducted by its Employees, Managers, and Executive Officers, under the direction of Chairman of the Board, to enhance the long-term value of the company for its Owners, the board of directors is elected by the partners to oversees and counsel management. The management is Chaired by Mr. Mohamed S. Abdelrhman – GM- & business’s group founder, and Consists of Seven members as a manager for each department.


FOR MANPOWER POOLING ONLY.
NO FEES in any form and/or purpose will be collected from the applicants.
Beware of illegal recruiters and human traffickers.

Only candidates can apply for this job.
Agency Information
  • Total Jobs 132 Jobs
  • Type Private Employment Agency
  • Status Valid License
  • License Validity December 9, 2026
  • Contact Numbers (02) 4628500; 5532597; 09175383014
  • Address 3F Atlas Shippers Building, Lot 2&4 Blk 6 B.F. Homes Martinville Portion II, Manuyo Dos, Las Piñas City 1744

Leave your thoughts

Search Jobs

FEMALE CLEANER Job Hiring in United Arab Emirates for Almasah Al Lamiah Bldg Cleaning

Job Opportunity in United Arab Emirates! Job Vacancy: FEMALE CLEANER Employer/Company: Almasah Al Lamiah Bldg Cleaning DMW Jobs Accreditation No.: 10484076 Job Location: United Arab Emirates FEMALE CLEANER Qualifications: Minimum of 2 years of working experience is required. Candidates must be at least a high school graduate. Female applicants are preferred for this role. At least 2 years of experience

Manufacturing Worker Job Hiring in Saudi Arabia for Dar Al Masalla Factory for Marble and Stone

Career Opportunity in Saudi Arabia! Job Vacancy: Manufacturing Worker Employer / Company: Dar Al Masalla Factory for Marble and Stone DMW Accreditation No.: 10489846 Job Location: Saudi Arabia Manufacturing Worker Qualifications: Minimum of 4 years of working experience is required. Candidates must be a Vocational Diploma / Short Course Certificate holder in related fields. Male applicants are preferred for this

ELECTRICAL/INSTRUMENTATION ENGINEER Job Hiring in United Arab Emirates for Control Contracting & Trading Co. LLC

Career Opportunities in United Arab Emirates! Job Vacancy: ELECTRICAL/INSTRUMENTATION ENGINEER Employer / Company: Control Contracting & Trading Co. LLC DMW Registration/Accreditation No.: 10422263 Job Location: United Arab Emirates ELECTRICAL/INSTRUMENTATION ENGINEER Qualifications: Minimum of 1 year of working experience is required. Candidates must be a Professional License (Passed Board/Bar/Professional License Exam) holder. Fresh graduates and first-time applicants are welcome to apply.

JUNIOR ELECTRICAL/INSTRUMENTATION ENGINEER Job Hiring in United Arab Emirates for Control Contracting & Trading Co. LLC

Career Opportunities in United Arab Emirates! Job Vacancy: JUNIOR ELECTRICAL/INSTRUMENTATION ENGINEER Employer / Company: Control Contracting & Trading Co. LLC DMW Registration/Accreditation No.: 10422263 Job Location: United Arab Emirates JUNIOR ELECTRICAL/INSTRUMENTATION ENGINEER Qualifications: Minimum of 1 year of working experience is required. Candidates must be a Professional License (Passed Board/Bar/Professional License Exam) holder. Fresh graduates and first-time applicants are welcome

JUNIOR MECHANICAL/PIPING/HVAC Job Hiring in United Arab Emirates for Control Contracting & Trading Co. LLC

Career Opportunities in United Arab Emirates! Job Vacancy: JUNIOR MECHANICAL/PIPING/HVAC Employer / Company: Control Contracting & Trading Co. LLC DMW Registration/Accreditation No.: 10422263 Job Location: United Arab Emirates JUNIOR MECHANICAL/PIPING/HVAC Qualifications: Minimum of 1 year of working experience is required. Candidates must be a Professional License (Passed Board/Bar/Professional License Exam) holder. Fresh graduates and first-time applicants are welcome to apply.

JUNIOR CIVIL/STRUCTURAL Job Hiring in United Arab Emirates for Control Contracting & Trading Co. LLC

Career Opportunities in United Arab Emirates! Job Vacancy: JUNIOR CIVIL/STRUCTURAL Employer / Company: Control Contracting & Trading Co. LLC DMW Registration/Accreditation No.: 10422263 Job Location: United Arab Emirates JUNIOR CIVIL/STRUCTURAL Qualifications: Minimum of 1 year of working experience is required. Candidates must be a Professional License (Passed Board/Bar/Professional License Exam) holder. Fresh graduates and first-time applicants are welcome to apply.

JUNIOR PLANNING ENGINEER Job Hiring in United Arab Emirates for Control Contracting & Trading Co. LLC

Career Opportunities in United Arab Emirates! Job Vacancy: JUNIOR PLANNING ENGINEER Employer / Company: Control Contracting & Trading Co. LLC DMW Registration/Accreditation No.: 10422263 Job Location: United Arab Emirates JUNIOR PLANNING ENGINEER Qualifications: Minimum of 1 year of working experience is required. Candidates must be a Professional License (Passed Board/Bar/Professional License Exam) holder. Fresh graduates and first-time applicants are welcome

ELECTRICAL/INSTRUMENTATION ENGINEER Job Hiring in United Arab Emirates for Control Contracting & Trading Co. LLC

Career Opportunities in United Arab Emirates! Job Vacancy: ELECTRICAL/INSTRUMENTATION ENGINEER Employer / Company: Control Contracting & Trading Co. LLC DMW Registration/Accreditation No.: 10422263 Job Location: United Arab Emirates ELECTRICAL/INSTRUMENTATION ENGINEER Qualifications: Candidates must be Professional License holders (Passed Board/Professional License Exam). Minimum of 1 year working experience is required. First-timers and fresh graduates are welcome to apply. Bachelor’s Degree in

WELDER Job Hiring in United Kingdom for Edge Innovative Solutions

Career Opportunities in United Kingdom! Job Vacancy: WELDER Employer / Company: Edge Innovative Solutions DMW Accreditation No.: 10442175 Job Location: United Kingdom WELDER Qualifications: Minimum of 3 years work experience High school diploma or equivalent; completion of a technical or vocational welding program is preferred. Proven experience in welding and fabrication, preferably in industrial, construction, or manufacturing settings. Proficiency in

HAIRDRESSER Job Hiring in Saudi Arabia for HALTAY AL-JADIDA

Career Opportunity in Saudi Arabia! Job Vacancy: HAIRDRESSER Employer/Company: HALTAY AL-JADIDA DMW Registration / Accreditation No. 202508082 Job Location: Saudi Arabia HAIRDRESSER Qualifications: At least 2 years of working experience in hair care or a similar role. No minimum educational requirement for this position. Strong knowledge of hair treatments, coloring techniques, and styling. Excellent communication skills and the ability to

STEEL STRUCTURE ENGINEER Job Hiring in Mozambique for DAEWOO E&C CO., LTD.

Job Opportunities in Mozambique! Job Vacancy: STEEL STRUCTURE ENGINEER Employer/Company: DAEWOO E&C CO., LTD. DMW Registration / Accreditation No.: 10382262 Job Location: Mozambique DAEWOO E&C CO., LTD. is seeking experienced and highly motivated Steel Structure Engineers for deployment to Mozambique. The successful candidate will be responsible for structural engineering design, analysis, coordination, and project support for steel structure works while

QC STEEL STRUCTURE INSPECTOR Job Hiring in Saudi Arabia for SGC Arabia Company Limited

Job Opportunity in Saudi Arabia! Job Vacancy: QC STEEL STRUCTURE INSPECTOR Employer/Company: SGC Arabia Company Limited DMW Accreditation No.: 2025018797 Job Location: Saudi Arabia QC STEEL STRUCTURE INSPECTOR Qualifications: Male applicants are preferred Minimum of 5 years of relevant work experience in oil & gas, petrochemical, or construction industries. Strong knowledge of steel structure fabrication and erection standards. Familiarity with

DOCUMENT CONTROLLER Job Hiring in Saudi Arabia for SGC Arabia Company Limited

Job Opportunity in Saudi Arabia! Job Vacancy: DOCUMENT CONTROLLER Employer/Company: SGC Arabia Company Limited DMW Accreditation No.: 2025018797 Job Location: Saudi Arabia DOCUMENT CONTROLLER Qualifications: Male applicants are preferred Minimum of 5 years of relevant work experience in oil & gas, petrochemical, or construction industries. Strong organizational, communication, and record-keeping skills. Proficiency in document management software and Microsoft Office Suite.

SCHEDULER Job Hiring in Saudi Arabia for SGC Arabia Company Limited

Job Opportunity in Saudi Arabia! Job Vacancy: SCHEDULER Employer/Company: SGC Arabia Company Limited DMW Accreditation No.: 2025018797 Job Location: Saudi Arabia SCHEDULER Qualifications: Male applicants are preferred Minimum of 5 years of relevant work experience in oil & gas, petrochemical, or construction industries. Proficiency in project scheduling software (e.g., Primavera P6, MS Project) and Microsoft Office Suite. Strong organizational, analytical,

LANDSCAPE ARCHITECT Job Hiring in Saudi Arabia for Hussain And Abdul Aziz Mohammed Al Marzouk Al Sinan Trading & Contracting Company

Career Opportunity in Saudi Arabia! Job Vacancy: LANDSCAPE ARCHITECT Employer/Company: Hussain And Abdul Aziz Mohammed Al Marzouk Al Sinan Trading & Contracting Company (LCC) DMW Registration / Accreditation No.: 10423855 Job Location: Saudi Arabia LANDSCAPE ARCHITECT Qualifications: Minimum of 5 years of working experience is required. Must be a Bachelor’s / College Degree holder in Agriculture, Architecture/Urban Studies, or related

CIVIL SITE ENGINEER Job Hiring in United Arab Emirates for Gusan Construction Co., Ltd.

Job Opportunities in United Arab Emirates! Job Vacancy: CIVIL SITE ENGINEER Employer/Company: Gusan Construction Co., Ltd. DMW Registration / Accreditation No.: 10165761 Job Location: United Arab Emirates CIVIL SITE ENGINEER Qualifications: Minimum of 5 years of working experience is required. Must be a Bachelor’s / College Degree holder in Civil Engineering or related engineering field. Must have at least 5

CNC PROGRAMMER (LATHE & MILL) Job Hiring in New Zealand for All Traces Contract Services Ltd.

Job Opportunities in New Zealand! Job Vacancy: CNC PROGRAMMER (LATHE & MILL) Employer/Company: All Traces Contract Services Ltd. DMW Accreditation No.: 10280720 Job Location: New Zealand CNC PROGRAMMER (LATHE & MILL) Qualifications: Minimum of 5 years of proven experience as a CNC Programmer (Lathe & Mill). Experience setting up and operating CNC lathes and milling machines (Hyundai or similar equipment).

GENERAL AFFAIR Job Hiring in Saudi Arabia for SGC Arabia Company Limited

Job Opportunity in Saudi Arabia! Job Vacancy: GENERAL AFFAIR Employer/Company: SGC Arabia Company Limited DMW Accreditation No.: 2025018797 Job Location: Saudi Arabia GENERAL AFFAIR Qualifications: Male applicants are preferred Minimum of 5 years of relevant work experience in oil & gas, petrochemical, or construction industries. Strong organizational, communication, and administrative skills. Ability to manage multiple tasks, coordinate teams, and maintain

WESTERN PASTRY CHEF Job Hiring in Oman for Al Waseet Manpower Services

Job  Opportunities in Oman! Job Vacancy: WESTERN PASTRY CHEF Employer/Company: Al Waseet Manpower Services DMW Accreditation No.: 10382909 Job Location: Oman WESTERN PASTRY CHEF Qualifications: Minimum of 5 years of working experience is required. Candidate must be a Bachelor’s / College Degree holder in any field or similar fields. Experience in preparing European and American-style desserts, breads, and pastries such

MASSAGE THERAPIST Job Hiring in Oman for Al Waseet Manpower Services

Job  Opportunities in Oman! Job Vacancy: MASSAGE THERAPIST Employer/Company: Al Waseet Manpower Services DMW Accreditation No.: 10382909 Job Location: Oman MASSAGE THERAPIST Qualifications: Minimum of 5 years of working experience is required. Candidate must be a Vocational Diploma / Short Course Certificate holder in any field or similar fields. Experience in therapeutic massage techniques such as deep tissue, Swedish, prenatal,
error: Content is protected !!