Job Expired

HIGH END PAINTER Job Hiring in New Zealand for All Trades Contract Services Ltd.

Jobs Abroad

Job Opportunities in New Zealand!

Job Vacancy: HIGH END PAINTER
Employer/Company: All Trades Contract Services Ltd.
Job Location: New Zealand

HIGH END PAINTER

Qualifications:

  • Proven experience in painting and plastering with a high standard of finish.
  • Strong understanding of surface preparation, materials, and application techniques.
  • Excellent time management and organisational skills.
  • High attention to detail and commitment to quality. Must have experience in Heritage house, Hotel Interiors, Casinos, etc.
  • Effective communication skills – verbal and written.
  • Ability to work both in a team and independently.
  • Physically fit and capable of manual work.
  • Positive attitude, initiative, and problem-solving mindset.
  • Commitment to health and safety.

Responsibilities:

  • Prepare surfaces and apply paint finishes to a high standard using brush, roller, and spray techniques.
  • Interpret specifications and scopes of work accurately.
  • Maintain clean, tidy, and protected work areas.
  • Lead painting tasks on-site and coordinate with other trades.
  • Ensure correct use and maintenance of painting tools and equipment.
  • Identify and communicate material requirements in advance.
  • Prepare and repair surfaces including gib stopping, skimming, and patching.
  • Apply plaster finishes to walls, ceilings, and architectural features.
  • Achieve smooth, quality, paint-ready finishes with attention to detail.
  • Mix and apply plaster compounds to required consistency.
  • Maintain tools and ensure safe handling of materials.
  • Maintain site tidiness including sweeping, rubbish removal, and material storage.
  • Set up and clear work areas as needed.
  • Operate manual vehicles and tow trailers confidently (valid license required).
  • Perform deliveries and assist with logistics.
  • Run job sites in the absence of a Manager or Supervisor.
  • Communicate effectively with management, team members, subtrades, and clients.
  • Ensure readiness for daily tasks with appropriate tools, materials, and information.
  • Follow and enforce company health and safety policies and procedures.
  • Use PPE and safety equipment correctly and consistently.
  • Identify and report hazards and incidents immediately.
  • Sign in/out of sites using the company app.
  • Support and mentor apprentices and junior team members.
  • Foster a collaborative and respectful team culture.
  • Share knowledge and encourage continuous improvement
  • Accurately complete timesheets and site documentation.
  • Maintain clear notes of activities, variations, and incidents.
  • Report progress and issues to the Painting & Finishes Manager regularly.
  • Use company vehicles, tools, and equipment responsibly.
  • Report faults or damage promptly.
  • Ensure tools and materials are stored securely and appropriately.

Requirements:

  • Valid Passport
  • Detailed RESUME
  • Certificate of Employment

For interested applicants you may directly submit your application to us thru walk-in.
We are conducting preliminary interviews every weekdays Monday to Friday 8AM to 12PM.

Walk-in applicants can visit us at:
JOBLANE International Manpower Services, Inc.
📍Unit 1203-1209 12F Leon Bldg., 1151 MH Del Pilar, Ermita, Manila, Philippines
(Landmark: Ermita Church)


For Manpower Pooling Only
Beware of Illegal Recruiters
No Fees to be Collected During Application Process

  • This job has expired!

Leave your thoughts

Search Jobs

INJECTION MOLD SETTER Job Hiring in Belgium for Job Talent

Career Opportunity in Belgium! Job Vacancy: INJECTION MOLD SETTER Employer/Company: Job Talent DMW Registration / Accreditation No.: 10373058 Job Location: Belgium INJECTION MOLD SETTER Qualifications: Minimum 5 years of hands-on experience as a Mold Setter in the Plastics/Polymer industry. Required experience with ARBURG and ENGEL injection molding machines. Must have a Technical Professional Bachelor’s degree or related technical qualification. Skilled

Material Controller Job Hiring in Equatorial Guinea for Elite Construcciones

Career Opportunity in Equatorial Guinea! Job Vacancy: Material Controller Employer/Company: Elite Construcciones DMW Registration No. 100977775 Job Location: Equatorial Guinea Material Controller Qualifications: At least 3 years of relevant Oil & Gas work experience is required. Experience in material control, inventory management, warehouse operations, or materials coordination is preferred. With a valid TESDA National Certificate (NC) related to the trade,

Heavy Equipment Operator Job Hiring in Equatorial Guinea for Elite Construcciones

Career Opportunity in Equatorial Guinea! Job Vacancy: Heavy Equipment Operator Employer/Company: Elite Construcciones DMW Registration No. 100977775 Job Location: Equatorial Guinea Heavy Equipment Operator Qualifications: At least 3 years of relevant Oil & Gas work experience is required. Proven experience operating heavy equipment in Oil & Gas, construction, or related industrial projects. With a valid TESDA National Certificate (NC) related

BEAUTICIAN / MANICURIST Job Hiring in United Arab Emirates for Dubai Royal Palaces Hospitality LLC

Job Opportunity in United Arab Emirates! Career Opportunity: BEAUTICIAN / MANICURIST Employer/Company: Dubai Royal Palaces Hospitality LLC DMW Accreditation No.: 37720263708 Job Location: Dubai, United Arab Emirates BEAUTICIAN / MANICURIST Qualifications: A minimum of 1 year of relevant working experience is required. No minimum educational attainment is required for this position. Female applicants are preferred for this role. Good English

Genset Electrical Technician Job Hiring in Papua New Guinea for Raumai 18 Ltd

Career Opportunities in Papua New Guinea! Job Vacancy: Genset Electrical Technician Employer/Company: Raumai 18 Ltd DMW Registration / Accreditation No.: 5927 Job Location: Papua New Guinea Genset Electrical Technician Qualifications: A minimum of 4 years of relevant working experience is required. Candidates must be a Vocational Diploma / Short Course Certificate holder in Engineering (Electrical/Electronic), Engineering (Others), or a similar

Generator Electrical Technician Job Hiring in Papua New Guinea for Raumai 18 Ltd

Career Opportunities in Papua New Guinea! Job Vacancy: Generator Electrical Technician Employer/Company: Raumai 18 Ltd DMW Registration / Accreditation No.: 5927 Job Location: Papua New Guinea Generator Electrical Technician Qualifications: A minimum of 4 years of relevant working experience is required. Candidates must be a Vocational Diploma / Short Course Certificate holder in Engineering (Electrical/Electronic), Engineering (Others), or a similar

HAIRDRESSER Job Hiring in Saudi Arabia for Salman Marzoq Al Harbi Medical Complex

Job  Opportunities in Saudi Arabia! Job Vacancy: HAIRDRESSER Employer/Company: Salman Marzoq Al Harbi Medical Complex DMW Registration / Accreditation No.: 10467512 Job Location: Saudi Arabia HAIRDRESSER Qualifications: A minimum of 2 years of relevant working experience is required. Must be at least a High School Graduate. Female applicants are preferred for this role. Proven experience in professional hairdressing, salon services,

RNO OPD In-charge Job Hiring in Papua New Guinea for Pacific International Hospital

Job Opportunity in Papua New Guinea! Job Vacancy: RNO OPD In-charge Employer/Company: Pacific International Hospital DMW Accreditation No.: 10473043 Job Location: Papua New Guinea RNO OPD In-charge Qualifications: A minimum of 3 years of relevant working experience is required. Candidates must be a Bachelor’s/College Degree holder in Biotechnology or a related field. Must have BSc Echocardiography Technology (ECT), Registered Diagnostic

Electrical Design Engineer Job Hiring in Saudi Arabia for SRACO International Contracting

Career Opportunity in Saudi Arabia! Job Vacancy: Electrical Design Engineer Employer/Company: SRACO International Contracting Jobsite / Projection Location: Kingdom of Saudi Arabia Electrical Design Engineer Qualifications: Bachelor’s degree in Electrical Engineering or equivalent, recognized by the employer organization. Minimum of 10 years of experience in an electrical design engineering office. Proficient in electrical design calculation software. Strong understanding of international

TRAILER TRUCK DRIVER Job Hiring in Slovakia for Air and Road Transport

Career Opportunity in Slovakia! Job Vacancy: TRAILER TRUCK DRIVER Employer/Company: Air and Road Transport Job Location: Slovakia TRAILER TRUCK DRIVER Qualifications: Male applicants are preferred for this role. Minimum of 3 years of working experience With valid ncii driving certificate, valid professional drivers license with b-ce (3,8) restrictions. Experience driving in europe and with europian valid license is a must.

Industrial Electrician Job Hiring in Papua New Guinea for Raumai 18 Ltd

Career Opportunities in Papua New Guinea! Job Vacancy: Industrial Electrician Employer/Company: Raumai 18 Ltd DMW Registration / Accreditation No.: 101116074 Job Location: Papua New Guinea Industrial Electrician Qualifications: Qualified and registered electrician Electrical engineer with at least 5 years experience in industrial and manufacturing sector. Degree in electrical technology, engineering. Diploma in mechatronics Experience in manufacturing, gensets and industrial wiring,

JEWELRY DESIGNER / DRAFTSWOMAN Job Hiring in Kuwait for Al-khudairi Jewellery

Career Opportunity in Kuwait! Job Vacancy: JEWELRY DESIGNER / DRAFTSWOMAN Employer/Company: Al-khudairi Jewellery Job Location: Kuwait JEWELRY DESIGNER / DRAFTSWOMAN Qualifications: Female applicants are preferred for this role. With proven experience as a jewelry designer or artist(portfolio required) With bachelor’s degree in fine arts, jewellery design, fashion design or related field Responsibilities: Strong drawing, sketching, and creative illustration skills. Strong

CAREGIVER (PERSONAL CARE WORKER) Job Hiring in Saudi Arabia for Saudi Manpower Solutions Company

Career Opportunity in Saudi Arabia! Job Vacancy: CAREGIVER (PERSONAL CARE WORKER) Employer / Company: Saudi Manpower Solutions Company (SMASCO) Job Location: Saudi Arabia CAREGIVER (PERSONAL CARE WORKER) Qualifications: Minimum of 2 years of relevant working experience is required. Must be a Vocational Diploma/Short Course Certificate holder in Caregiving or a related field. Female applicants are preferred for this role. Experience

STAFF NURSE Job Hiring in Saudi Arabia for Dr. Sulaiman Al Habib Hospital

Career Opportunities in Saudi Arabia! Job Vacancy: STAFF NURSE Employer / Company: Dr. Sulaiman Al Habib Hospital DMW Registration / Accreditation No.: 10458479 Job Location: Saudi Arabia STAFF NURSE Qualifications: A minimum of 1 year of working experience is required. Candidates must be a Professional License (Passed Board/Bar/Professional License Exam) holder. Must have a valid professional nursing license as required

CNC Operator Job Hiring in Czech Republic for TATRA TRUCKS

Career Opportunities in Czech Republic! Job Vacancy: CNC Operator Employer / Company: TATRA TRUCKS a.s. DMW Accreditation No.: 10487663 Job Location: Czech Republic CNC Operator Qualifications: Male, 25 to 40 years old With at least 1 year experience with CNC Machines With experience with FANUC, SINUMERIC, HEIDENHAIN control system, an advantage Must be able to read and understand technical drawings

CLEANER Job Hiring in Bahrain for Swar Manpower Supply

Career Opportunity in Bahrain! Job Vacancy: CLEANER Employer/Company: Swar Manpower Supply Job Location: Bahrain CLEANER Qualifications: Female applicants are preferred for this role. Minimum of 2 years of working experience Preferably ex-abroad with household experience. Experienced in cleaning establishments, facilities and houses. Knowledge in using cleaning equipments like floor polisher, vacuum cleaner Experience in maintaining the cleanliness and hygiene of

Cake Decorator Job Hiring in Kuwait for Heirs of Sameer Saeed and Youssef Nadoum General Trading Co.

Career Opportunity in Kuwait! Job Vacancy: Cake Decorator Employer/Company: Heirs of Sameer Saeed Yousef Nadoum General Trading Co DMW Registration / Accreditation No.: 10256371102726 Lob Location: Kuwait Cake Decorator Qualifications: Minimum of 3 years work experience With knowledge in cream cake design, make fondant cake, 3d cutting cakes and can paint. Responsibilities: Using a variety of tools and techniques to

Registered Nurse (RCC) Job Hiring in Qatar for Resala Care Co.

Career Opportunity in Qatar! Job Vacancy: Registered Nurse (RCC) Employer/Company: Resala Care Co. DMW Registration / Accreditation No. 10339565 Lob Location: Qatar We are hiring Registered Nurse bound to Qatar! Registered Nurse (RCC) Qualifications: Minimum of 2 years of relevant working experience is required. Must be a holder of a Professional License/Passed Board or Professional Licensure Examination. Must be a

Production Maintenance Technician Job Hiring in Saudi Arabia for Premium Solutions

Job Opportunities in Saudi Arabia! Job Vacancy: Production Maintenance Technician Employer/Company: Premium Solutions Est. Sales DMW Accreditation No.: 202308274 Job Location: Saudi Arabia Production Maintenance Technician Qualifications: A minimum of 3 years of relevant work experience is required. Must hold a Vocational Diploma / Short Course Certificate in Electrical, Electronic, Industrial Engineering, or related fields. An Associate or Degree in

MILLING MACHINE OPERATOR Job Hiring in Japan for Steel Polish Co. Ltd.

Job Opportunity in Japan! Job Vacancy: MILLING MACHINE OPERATOR Employer/Company: Steel Polish Co. Ltd. DMW Registration / Accreditation No.: 10379451 Job Location: Japan MILLING MACHINE OPERATOR Qualifications: A minimum of 1 year of relevant working experience is required. No minimum educational attainment is required for this position. Experience operating or working with milling machines is preferred. Knowledge of hexahedral processing
error: Content is protected !!